| Engineering Plastics Design Venting DSM Corporate | Sitemap | Contact | undefined | Print | Sign-in | A A A Go You are here: Venting The displaced air in the mold cavity must be able to escape during mould filling...
| |
| PSC Troubleshooting Parts too Small Increase the back pressure. Decease mold temperature. Increase melt temperature. Increase cavity venting. Increase the cooling time. Mold design is incorrect. Verify mold shrinkage...
| |
| New Page 3 best conventional practice. . Conventional venting is eliminated, so no cleaning and re-venting is required. In multi-cavity tooling, the individual shooting pots are used, so no...
| |
| Troubleshooting -Decrease injection speed. -Decrease melt and/or mold temperature. -Improve mold cavity venting. Vents may become smaller over time due to wear and they will need to be...
| |
| [pdf] Top Ten Design Tips for Nylons on the material. Runners should be balanced for multi cavity tools to ensure that each cavity receives equal flow and pressure simultaneously. Venting and cold slugs...
| |
| EPPM Magazine Gassing Problem Solved The single impression tool had been designed in the conventional manner with spark eroded cavities for the hinge and orthodox channels for venting. After some time, it was found...
| |
| |
| |
|
|
| |
|
| A Poor Way To Fill 32 Cavities for Injection... |
| A molder gets a lecture on nozzle freeze-off before his runner system is fixed. |
| Subgates & Venting in Nylon 6, Polyethylene... |
| Even without the plastic material type or part prints available, Bob Hatch the Troubleshooter shows how to cure the short shots in Nylon 6, Polyethylene & Polypropylene. |
| Gate Location: IDES - The Plastics Web® |
| I told him the swirls are usually associated with glass-filled nylon 6/6 that is not impact modified. Nylon 6 and 6/66 do not exhibit these surface swirls, and neither do glass-filled nylons with a rubber impact modifier—just straight 33% glass-filled nylon 6/6. I did my usual review of the part, starting with the runners and gates. |
|
|